Apc Matrix Ups 3000 Manual

7 min (480 Watts) 24 min (240 Watts) 5 min (500 Watts) 16 min (250 Watts).

From here:'In order for the LED to be lit or to be cleared, it is necessary to run a valid self test. For a self test to be considered valid, it must have the following characteristics: The battery capacity must be greater than 75% or the Smart-UPS must have been charging for at least 8 hours from the last low battery condition.

(Low battery condition refers to a statewhen the Smart-UPS battery has almost fully discharged). A self test can be initiated in any one of five ways:. PowerChute plus software. SmartSlot accessory. Smart-UPS front panel test button. Automatic timer- every two weeks from turn on. Start up of the UPS'.

From here:'In order for the LED to be lit or to be cleared, it is necessary to run a valid self test. For a self test to be considered valid, it must have the following characteristics: The battery capacity must be greater than 75% or the Smart-UPS must have been charging for at least 8 hours from the last low battery condition. (Low battery condition refers to a statewhen the Smart-UPS battery has almost fully discharged). A self test can be initiated in any one of five ways:. PowerChute plus software. SmartSlot accessory. Smart-UPS front panel test button.

Automatic timer- every two weeks from turn on. Start up of the UPS'. You could cover it with a piece of electric tape, worked on my car's check engine light for years now.But seriously, you need to re-calibrate when you replace the batteries, then the light will go out. We have the same model and did the same thing.

You may need to re-calibrate it a couple times to get it right.Our runtime was 10 min, then after new batteries and calibration #1 we hit over an hour. Calibration #2 gave us a more accurate reading of 45 min runtime, all tests after that were the same. Rock action mogwai rar.